DJD-105

Product Introduction

HFC-245fa is the foaming agent of DJD-105 blend polyols, the last substitution of CFC-11, which applies to refrigerators and thermal insulation equipments. Except for environmental protection, it also has characteristics as follows,

1、excellent flowability and the density distributing of foam is uniformity.;

2、the foam has good low temperature dimensional stability and cohesiveness;

 3、demould time is short.

 Physical Property

Appearance                Hydroxyl value               mgKOH/g Dynamic viscosity （25℃）      mPa.s Density（20℃）           g/ml Storage temperature                ℃ Storage stability              Month

Light yellow transparent viscous liquid  330-410 2000-3000 1.05 ≤25 6

Recommended Ratio

Raw material	pbw
DJD-105blend polyols HFC-245fa Isocyanate	100 15-17 145

Technology and Reactivity Property(the exact value varied depending on processing conditions)

Items	Manual mixing	High pressure machine
Raw material Temperature     ℃ Mold Temperature          ℃ CT                       s GT                       s TFT                      s Free Density             kg/m3	15-20 35-40 8-15 70-90 100-120 23-25	15-20 35-40 6-12 50-70 80-100 22-24

Foam performance

Foam Density by Molding Closed-cell Rate Thermal Conductivity (15 ℃) Compressive strength (perpendicular to the direction of rising) Dimensional Stability            (24h, -20 ℃)           (24h, 100 ℃)

GB/T 6343 GB/T 10799 GB/T 3399 GB/T 8813   GB/T 8811

28-35kg/m3 ≥90% ≤19mW/(m.K) ≥150kPa      ≤0.5% ≤1.0%

The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.